Pressure washers are used in the home for a variety of reasons.

Cleaning large surfaces like a deck, driveway or even the exterior of a home would take a long time to do by hand. A portable pressure washer with water tank are a tool that combines the power of natural cleaning of water and high pressure to deliver an effective wash in a fraction of the time.

As with all tools, in order to maximize the use of a pressure washer, you must understand the way it works. Following is a guide that can help you understand the basics of using a pressure washer.

What is the process of a pressure washer

How does a pressure washer get its pressure

The pressure washer utilizes the water from a normal garden hose. The hose is connected to the machine and a high-speed pump in it raises pressure of the water until it can be used to create a highly abrasive stream. The intensity of the stream is controlled through the spray nozzle.

What are the various types of pressure washer nozzles?

The nozzles will ultimately will provide the best cleaning power. There are five basic nozzles that are differentiated by the degree of focused on the spray.

The red nozzle makes a thin, powerful jet of water that is perfect for the toughest staining.

Yellow nozzles are one step down in intensity , and is the best choice to remove mildew and paint.

The green nozzle can be described as a general purpose cleaning nozzle.

The white nozzle has the largest spray, making it the ideal choice for light-duty cleaning and rinsing.

This nozzle in black is only the one which can be used with soap. In addition, you can buy an turbo spray nozzle, an multipurpose nozzle or a accessory for cleaning surfaces, which is ideal for cleaning patios, decks and more.

The steps to take when using the best pressure washer sandblasting kit

The best instructions for using your pressure washer should be included in the purchase, this general outline can give you an idea of the overall process.

  1. Clear the area you’ll be cleaning to make sure all delicate items have been taken away. Sweep away dirt and debris and cover everything that cannot be moved using an the tarp.
  2. Examine the area to be aware of any outlets, windows and vents.
  3. Select and connect the proper nozzle for the job.
  4. Connect your garden hose to the pressure washer, and give the machine a thorough inspection to ensure that everything is fastened tightly and the machine is safe for use.
  5. Put on a pair of safety goggles to prevent debris from splashing back into your eyes.
  6. Switch on the water supply from the outside spigot.
  7. Release the trigger on the wand until you release all air tension that could be in the line.
  8. Follow the specific instructions of your machine for starting.
  9. Before use you spray, test the intensity that the spray is able to emit in a secure area and adjust as needed.
  10. You can now begin cleaning.
  11. After shutting off your pressure washer and turning off your water source, be sure that you press the trigger to allow any pressurized water to drain before disconnecting the hose as well as other components.

Tips for Pressure Washing

  • Pressure washers use a lot of water. Be sure to provide adequate drainage where you’re working otherwise things can quickly get messy.
  • The most important aspect of cleaning safely is using the appropriate nozzle to do the job. Be careful, as the wrong nozzle can damage siding and wood.
  • Avoid spraying on painted surfaces, windows or outdoor fixtures. Also, avoid spraying electrical lines.
  • The closer you are to a surface, the more thoroughly the pressure washer will clean. Always begin cleaning from a distance, several feet away. If you need greater intensity you can gradually move toward the surface you’re cleaning.
  • Never make use of a pressure washer if you’re on an elevated ladder.
  • When cleaning vertically, move between top and bottom, in a side to side pattern.
  • In small sections, work on clearly defined objectives.
  • If you’re exhausted, take a break.