Basics of Building a Vinyl Fence

Fences can provide your family with security and privacy. In addition, they can also be strong design elements to define a home’s exterior appearance. However, fences can be challenging to maintain and build. Wooden fences can look beautiful but require a lot of maintenance. Some untreated wood like cedar can be left on its own to turn silver-gray and streaky–a look that some homeowners do not like. PVC Fencing Jeffrey’s bay While painted fences look neat and tidy, they can become more difficult to paint over time.

Vinyl fences are the answer. Vinyl fences have a reputation for being durable, attractive, and low-maintenance. Vinyl fences can be left unpainted and treated because the vinyl is infused with their color. They keep their colors consistent from year to year, regardless of the season.

How to Build a Vinyl Fence

Vinyl fences depend on an interlocking part system. Upon purchase, you must make sure that you have all of the necessary components to form a complete kit. Vinyl fences prohibit improvisation, so it is essential that you make sure you have all the necessary components to construct your fence.

Vinyl Picket Fences

PVC Fencing Port Elizabeth Vinyl picket fences consist of anchor pipes, which are driven into the ground with a sledgehammer. Hollow posts are able to slide over the anchor pipes and act as sleeves. A section can be made from two anchor pipes: one rail at its bottom and one at its top. Multiple pickets run through each rail.

Vinyl Privacy Fences

Taller, six-foot vinyl privacy fences’ posts must be anchored into the ground with concrete, like conventional four-by-four fence posts. These posts don’t slide over an anchorpipe; they are sunk directly in the concrete. A fence panel can be pre-built, which means it is one piece and not multiple pieces that need to be put together.

Codes and Regulations

A permit may be required before you build your fence. A permit must be closed if this is the case. All work must be built according to local building codes and regulations. Check out legal issues such permits and zoning. You can get advice from your local permitting department about local zoning regulations and setback regulations that may affect fence construction.

When to build your vinyl fence

It’s difficult to drive the picket fence anchor pipes or dig the holes in the ground if it is frozen. Wait for the ground to thaw completely before beginning construction.

Fence-Building Safety

Call your Utility Locator when you dig on your land to locate any underground services, such as gas, water and electrical lines. PVC Fencing East London These services will also be marked with color-coded paint that eventually fades.

What you will need

Equipment / Tools

  • Shovel or post-hole digger
  • Twine and wood stakes
  • Bubble level
  • Tape measure
  • Sledgehammer
  • Cordless drill
  • Circular saw

Materials

  • Vinyl picket and privacy fence set
  • Quick-set concrete
  • Filler gravel

Joshua Wright

Read Previous

The Basic Principles Of PVC Fencing George

Read Next

Pressure Washer Sandblasting Kit To Make Your Life Easy

Leave a Reply

Your email address will not be published. Required fields are marked *